Lupa

Izpis gradiva Pomoč

A- | A+ | Natisni
Naslov:Combining thermo-hydro- mechanical and phenol-resin impregnation treatments : potential for high-density poplar flooring
Avtorji:ID Schwarzkopf, Matthew (Avtor)
Datoteke:.pdf RAZ_Schwarzkopf_Matthew_2020.pdf (82,33 KB)
MD5: A3C7EEB4121E72159A8B96190765C8CE
 
URL https://fpj.kglmeridian.com/view/journals/fpro/70/2/article-p147.xml
 
Jezik:Angleški jezik
Vrsta gradiva:Članek v reviji
Tipologija:1.03 - Drugi znanstveni članki
Organizacija:IAM - Inštitut Andrej Marušič
Opis:Thermo-hydro-mechanical (THM) treatments can be used to improve certain properties of underutilized wood species, especially those with low densities. These treatments densify the wood by softening the cell walls using heat, pressure, and moisture but are subject to set-recovery (recovery of compressive deformation) when exposed to humidity. Phenol-based resins have been successful in mitigating this issue when impregnated into the wood. This work explores the use of a new phenol-based resin combined with a THM treatment to limit set-recovery and produce products with the potential for flooring applications. Scratch resistance, hardness, and glue-line shear strength were used to assess the performance. The THM treatment and impregnated phenol resin used in this study increased the scratch resistance, density, and hardness of natural poplar wood and created satisfactory bonding conditions for flooring purposes. With optimization of THM parameters and resin solids content, the resulting product could provide a high-quality flooring material used alone or as a thin laminate from a low-density species like poplar
Ključne besede:densified wood, impregnation, phenol resin
Verzija publikacije:Objavljena publikacija
Datum objave:01.03.2020
Leto izida:2020
Št. strani:str. 1-4
Številčenje:Vol. 70, no. 2
PID:20.500.12556/RUP-21497 Povezava se odpre v novem oknu
UDK:674
ISSN pri članku:0015-7473
DOI:10.13073/FPJ-D-20-00002 Povezava se odpre v novem oknu
COBISS.SI-ID:243910147 Povezava se odpre v novem oknu
Datum objave v RUP:25.07.2025
Število ogledov:221
Število prenosov:3
Metapodatki:XML DC-XML DC-RDF
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del revije

Naslov:Forest products journal
Skrajšan naslov:For. prod. j.
Založnik:Forest Products Research Society
ISSN:0015-7473
COBISS.SI-ID:9389573 Povezava se odpre v novem oknu

Gradivo je financirano iz projekta

Financer:EC - European Commission
Številka projekta:739574
Naslov:Renewable materials and healthy environments research and innovation centre of excellence
Akronim:InnoRenew CoE

Sekundarni jezik

Jezik:Slovenski jezik
Ključne besede:zgoščen les, impregnacija, fenolna smola


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici